Jolly 2: float switch for clear water
Jolly 2: float switch for clear water
The Jolly 2 is a float switch ideal for use in clear water, designed to be easily installed even in tight spaces due to its compact dimensions.
Equipped with a high-performance microswitch and self-cleaning contacts, the Jolly 2 has a current rating of 10(8) A / 250 V.
This float switch level regulator model resists up to 5 bar pressure and is fitted with reinforcement points that make it perfect for installation on submersible pumps, even at considerable depths.
The exterior casing of the Jolly 2 is made of impact-resistant polypropylene and is hot-sealed by overmolding.
Jolly 2 is available in a variety of colors and combines practicality with optimal functionality.
Technical drawing
NO or NC version with ground
(Insulation class I)
Dual function version
(Insulation Class II)
Main features
- Type of product: Float switch
- Type of water: Clear water
- Dimensions: 126x84x43 mm
- Weight: 137 g
- Cubage: 249 cm³
- Floating body’s material: shockproof non-toxic polypropylene
*For the versione with earth specify, when ordering, if t should be used for filling or emptying
Specifications
- Operating temperature: 50 °
- Storage temperature: -20÷80 °C
- Operating voltage: 230 Vac
- Switching voltage: 250 Vac
- Frequency: 50-60 Hz
- Upper switching angle: 45° ±5°
- Lower switching angle: 45° ±5°
- Current with resistive load: 10 A
- Current with inductive load: 8 A
- Microswitch capacity: 21 A
- Protection level: IP 68
- Operating pressure: 5 Bar
Standard cables
– PVC H05VV-F 3×1 – Ø 9 mm
(Double function)
– H07RN-F 3G1 – Ø 8,8 mm
(emptying or filling, on request)
– H07RN-F 3×1 – Ø 8,8 mm
(double function)
– H07RN8-F 3G1 oil resistant – Ø 8,8 mm
(emptying or filling, on request)
