Nominal current 10(8) A / 250 V. Equipped with high performances micro switch, self-cleaning contact.
The advanced construction technology, the quality of the components used, the design and the rigorous controls make the TECNO 2 level electromechanical sensor a device with high reliability and maximum economy for applications in civil and industrial systems (wells, cisterns, purification plants) and in all those cases where it is necessary to check the level of non-aggressive liquids. TECNO 2 is supplied with a 21A microswitch for applications on motors up to 2HP. The outer casing is made of shockproof polypropylene and is sealed by over-moulding of the same material injected under pressure at 250°. Available in various colors.
Certification
Available colors
Technical drawing
NO/NC with earth
(insulation class I)
Double function version
(insulation class II)
Caratteristiche tecniche
Max. operating temperature
50 °C
Storage temperature
-20÷80 °C
Operating voltage
230 Vac
Max. switching voltage
250 Vac
Frequency
50-60 Hz
Upper switching angle
30° ±5°
Lower switching angle
30° ±5°
Current with resistive load
10 A
Current with inductive load
8 A
Microswitch capacity
21 A
Protection level
IP 68
Max. operating pressure
2 Bar
Dimensions
153x92x43 mm
Weight
170 g
Cubage
280 cm³
Floating body’s material
shockproof non-toxic polypropylene
Standard cables
PVC H05VV-F 3x1 - Ø 9 mm
(Double function)
H07RN-F 3G1 - Ø 8,8 mm
(emptying or filling, on request)
H07RN-F 3x1 - Ø 8,8 mm
(double function)
H05RN-F 3x1 - Ø 7,5 mm
(double function)
H07RN8-F 3G1 oil resistant - Ø 8,8 mm
(emptying or filling, on request)
FOR THE VERSION WITH EARTH SPECIFY, WHEN ORDERING, IF IT SHOULD BE USED FOR FILLING OR EMPTYING
