0%

EASYCON

09_EASYCON

Level regulator for clear waters 10(8) A

Nominal current 10(8) A / 250 V. Equipped with high performances micro switch, self cleaning contact.

The advanced construction technology, the quality of the components used, the design and the rigorous controls make the EASYCON electromechanical level sensor a highly reliable and highly economical device for applications in civil, industrial (wells, cisterns, purification plants) and in all those cases where it is necessary to check the level of non-aggressive liquids. Particularly suitable for use with electric pumps without integrated level regulator. The outer casing is made of shockproof polypropylene and is sealed by overmoulding of the same material injected under pressure at 250°.

Technical drawing

Technical scheme

Specifications

Max. operating temperature 50 °C
Storage temperature -20÷80 °C
Operating voltage 230 Vac
Max. switching voltage 250 Vac
Frequency 50-60 Hz
Upper switching angle 30° ±5°
Lower switching angle 30° ±5°
Current with resistive load 10 A
Current with inductive load 8 A
Microswitch capacity 21 A
Protection level IP 68
Max. operating pressure 2 Bar
Dimensions 153x92x43 mm
Weight 170 g
Cubage 280 cm³
Floating body’s material shockproof non-toxic polypropylene

Cavi standard

H07RN8-F 3G1 oil resistant - Ø 8,8 mm
(emptying or filling, on request)

H07RN-F 3G1 - Ø 8,8 mm
(emptying or filling, on request)

SPECIFY, WHEN ORDERING, IF IT SHOULD BE USED FOR FILLING OR EMPTYING